APC Smart-UPS VT 10kVA 400V w/4 Batt Mod Start-Up 5X8 Int Maint Bypass Parallel Capable SUVTP10KH4B4S

APC Smart-UPS VT 10kVA 400V w/4 Batt Mod Start-Up 5X8 Int Maint Bypass Parallel Capable SUVTP10KH4B4S

Our Address

No 5, Pepple Street, Computer Village, Ikeja, Lagos.

Tel: +234 802 181 8189
       +234 802 385 9617

Email: info@blessingcomputers.com
  • Output power capacity    8.0kWatts / 10.0kVA
  • Nominal Output Voltage     400V 3PH
  • Output Voltage Note    Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  • Efficiency at Full Load     95.7 %
  • Output Voltage Distortion     Less than 5% at full load
  • Output Frequency (sync to mains)      47 – 53 Hz for 50 Hz nominal
  • Output Frequency (not synced)      50Hz +/- 0.1% for 50Hz nominal
  • Load Crest Factor     3 : 1
  • Topology        Double Conversion Online
  • Waveform type      Sine wave
  • Maximum Output Current      16
  • Bypass        Built-in Maintenance Bypass, Built-in Static Bypass
  • Nominal Input Voltage       400V 3PH
  • Input frequency      40 – 70 Hz (auto sensing)
  • Input Connections       Hard Wire 5-wire (3PH + N + G)
  • Input voltage range for main operations    304 – 477V
  • Efficiency at Full Load       95.7 %
  • Maximum Input Current      14.0A
  • Input Power Factor at Full Load      0.98
  • 1 Year Warranty
In stock
Special Price ₦2,760,000.00 Regular Price ₦2,800,000.00


  • Parallel-redundant capable
    Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits


Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.


Customize UPS capabilities with management cards.
Network manageable
Provides remote power management of the UPS over the network.
LED status indicators
Quickly understand unit and power status with visual indicators.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Programmable frequency
Ensures compatibility with different input frequencies.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LCD display
Alpha-Numeric Display which displays system parameters and alarms.


Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Write Your Own Review
You're reviewing:APC Smart-UPS VT 10kVA 400V w/4 Batt Mod Start-Up 5X8 Int Maint Bypass Parallel Capable SUVTP10KH4B4S
Your Rating