APC Smart-UPS SRT 10000VA 230V SRT10KXLI

APC Smart-UPS SRT 10000VA 230V SRT10KXLI

Our Address

No 5, Pepple Street, Computer Village, Ikeja, Lagos.

Tel: +234 802 181 8189
       +234 802 385 9617

Email: info@blessingcomputers.com
  • Output power capacity    10.0kWatts / 10.0kVA
  • Nominal Output Voltage    230V
  • Output Voltage Distortion    Less than 2%
  • Output Frequency (sync to mains)       50/60Hz +/- 3 Hz
  • Load Crest Factor     3 : 1
  • Topology      Double Conversion Online
  • Waveform type     Sine wave
  • Bypass      Internal Bypass (Automatic and Manual)
  • Nominal Input Voltage   230V, 400V 3PH
  • Input frequency       40 – 70 Hz (auto sensing)
  • Input voltage range for main operations     160 – 275V
  • Battery type   Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time      1.5hour(s)
  • Nominal Battery Voltage     +/-192 V (split battery referenced to neutral)
  • Interface Port(s)     RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
  • Control panel    Multi-function LCD status and control console
  • Audible Alarm     Audible and visible alarms prioritized by severity
  • Emergency Power Off (EPO)     Yes
  • Surge energy rating     480Joules
  • 1 Year Warranty
Out of stock


  • 10/100 BaseT Connection
    Connect the device to a network using a 10 or 100 BaseT connection
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.


Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.


LED status indicators

Quickly understand unit and power status with visual indicators.

Network manageable

Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.


Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.


Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.


Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Audible alarms

Provides notification of changing utility power and UPS power conditions
Write Your Own Review
You're reviewing:APC Smart-UPS SRT 10000VA 230V SRT10KXLI
Your Rating