APC SMART-UPS 2200VA LCD 230V SMT2200I

APC SMART-UPS 2200VA LCD 230V SMT2200I

Our Address

No 5, Pepple Street, Computer Village, Ikeja, Lagos.

Tel: +234 802 181 8189
       +234 802 385 9617

Email: info@blessingcomputers.com
           sales@blessingcomputers.com
Rating:
0%
SKU
SMT2BCL
  • Output power capacity     1.98kWatts / 2.2kVA
  • Nominal Output Voltage     230V
  • Output Voltage Note   Configurable for 220 : 230 or 240 nominal output voltage
  • Output Voltage Distortion      Less than 5% at full load
  • Output Frequency   47 – 53 Hz for 50 Hz nominal | 57 – 63 Hz for 60 Hz nominal
  • Topology      Line Interactive
  • Waveform type      Sine wave
  • Nominal Input Voltage      230V
  • Input frequency    50/60 Hz +/- 3 Hz (auto sensing)
  • Input voltage range for main operations      160 – 286V
  • Input voltage adjustable range for mains operation    151 – 302V
  • Battery type     Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time     3hour(s)
  • Interface Port(s)        SmartSlot
  • Control panel       Multi-function LCD status and control console
  • Audible Alarm       Alarm when on battery : distinctive low battery alarm : configurable delays
  • Emergency Power Off (EPO)       Yes
  • Surge energy rating        365Joules
In stock
Special Price ₦320,000.00 Regular Price ₦340,000.00

APC SMART-UPS

  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Energy meter
    Provides actual kilowatt hours of usage for energy conscious users.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency
    Reduces utility costs, generates less heat.
  • Intuitive LCD interface
    Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
  • Predictive replace battery date
    Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
  • Pure sine wave output on battery
    Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Sequenced network shutdown and reboot
    Customize network shutdown and reboot sequence of connected servers and UPSs.
  • Single switched outlet group
    Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • StruxureWare Data Center Expert compatible
    Enables centralized management via StruxureWare Data Center Expert.
  • Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.

Manageability

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Network manageable
Provides remote power management of the UPS over the network.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serviceability

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Resettable circuit breakers
Enables a quick recovery from overload events.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Adaptability

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Write Your Own Review
You're reviewing:APC SMART-UPS 2200VA LCD 230V SMT2200I
Your Rating